北京地区第五阶段在用轻型车OBD监测频率的特征分析

随机采集北京地区200辆满足第5阶段排放标准在用车的车载诊断系统（OBD）的IUPR（OBD监测频率）数据,测试了4种典型车系的在用车在实际道路行驶工况下IUPR各监测项的特征分布,并和NEDC工况下的实验结果进行对比.结果表明：采集数据车辆的OBD系统均能实现对催化器和氧传感器的监控,对EGR和次级氧传感器的监控也可分别达到74%和91%;在用车平均点火循环3.9次才能满足一次目前IUPR的监测条件;各监测项IUPR均值均远大于国五标准限值0.10,但各IUPR监测值分布存在差异,催化转化器和氧传感器的达标率均为92%;实验室NEDC模拟工况基本能实现对各车系机动车尾气排放控制的监测,但4条实际道路测试结果则表明不同车系IUPR监测项分子+1的差异较大;拥堵路况的低速工况下OBD系统难以实现对车辆尾气排放控制系统各监测项的有效监测.因此,需结合北京实际路况进一步完善在用车辆OBD系统的监测条件,实现对北京在用车尾气排放控制系统的有效监控.     

个人乘用车用可替代燃料与我国未来的选择

个人乘用车排放量占道路交通运输二氧化碳(CO2)排放量的三分之一。因此,逐步实现其燃料由传统石化燃料汽柴油向新能源转变是交通运输行业低碳减排和绿色发展的重要抓手之一。本文对当前可供个人乘用车使用的4大类新能源即生物燃油、燃料乙醇、氢和电的属性,特别是其CO2减排效果和使用成本进行了分析和对比,并对新能源加注(充电)设施在欧盟和美国的布局战略和实施成果进行了介绍。结合欧美的实践和中国的实际,本文提出了未来个人乘用车用可替代燃油布局的建设,建议我国直接从传统石化汽油跨越至氢和/或电,并将其作为未来个人乘用车的燃料。     

2006—2012年广东省机动车尾气排放特征及变化规律

利用广东省年鉴及实地调查资料,基于COPERT Ⅳ模型计算并分析了2006─2012年广东省珠三角和非珠三角地区的机动车尾气排放清单. 结果表明:研究地区2006─2012年机动车保有量上升,国Ⅲ、国Ⅳ车辆所占比例提高,其中珠三角地区优化程度大于非珠三角地区;2006─2012年2个地区污染物(CO、VOC、NO_x、PM_2.5)排放因子均有降低,降幅在24.54%~57.89%之间. 机动车污染物排放量上升趋势及贡献特征地区性差异明显,2006─2012年非珠三角地区CO、VOC排放量分别上升了37.20%、26.93%,增幅高于珠三角地区,而珠三角地区2012年的NO_x、PM_2.5排放量增幅(分别为21.65%、14.60%)高于非珠三角地区. 轻型客车是2个地区CO和VOC的主要贡献车型,贡献率均达46.96%以上,并且处于上升状态,但珠三角地区增幅小于非珠三角地区;重型客车和重型货车是2个地区NO_x、PM_2.5的主要来源,贡献率均在40.78%以上.      

冶金行业环境污染物的特征与监测技术综述

冶金行业是国民经济重要的基础原材料工业,在其制造体系中大量的物质、产品流、废弃物、能量转换过程、多形式的排放过程都对环境造成不同层次和程度上的影响。针对不同工艺产生的污染物特征及主要污染物的种类,综述了环境监测运用的各类监测技术、监测方法,为环境管理、污染源控制、环境规划等提供科学依据。     

热闷钢渣用单轨移动罩车的设计

根据钢渣热闷工艺要求进行单轨移动罩车的结构设计与行走装置的设计,通过三维建模软件及理论力学分析计算此罩车的配重及质心,使罩车与导向装置接触处的压力最小,且罩车施加给低地轨的横向静摩擦力最小。通过此方法设计的单轨移动罩车能大大改善钢渣热闷厂房的工作环境,减少厂房的腐蚀,提高厂房屋顶的寿命周期。     

杭州市区机动车污染物排放特征及分担率

选取杭州市区绕城高速、快速路、主干道和民用支路4种典型道路进行工况测试,建立了2010年机动车CO、HC、NOx和PM10排放清单,获得了分车型、燃料类型、排放标准以及道路类型的机动车污染物排放分担率.结果表明,杭州市机动车的污染物排放分担率差别显著,乘用车、出租车和公交车是CO和HC排放的主要来源,重型货车和公交车是NOx和PM10排放的主要来源,且乘用车的NOx排放分担率也较大;柴油车的NOx和PM10的排放分担率远大于其保有量的贡献率,是其排放的主要来源,汽油车是CO和HC排放的主要来源;占保有量30%的国0和国I车辆,对CO、HC、NOx和PM10排放分担率分别为67%、69%、58%和82%;主干道是机动车CO、HC和NOx排放的主要来源,其排放分担率分别为66%、65%和64%,民用支路是PM10排放的主要来源,分担率为55%.     

Mutagenicity of diesel engine exhaust in the Ames / Salmonella assay using a direct exposure method

The aim of this study was to investigate the potential mutagenic activity of diesel engine exhaust in the Ames/Salmonella assay using a direct aerosol exposure system. So, TA 98 and TA 100 strains, with or without added S9 mix, were exposed to diesel emissions after varying degrees of filtration. Variants of these two strains, deficient in nitroreductase (TA 98NR and TA 100NR) or over-expressing O-Acetyl Transferase (YG 1024 and YG 1029), were also exposed to total (unfiltered) diesel exhaust to highlight the putative mutagenicity of any nitro-PAHs present in these emissions. Mutagenic activity of the diesel exhaust was demonstrated on Salmonella typhimurium, strains TA 100 and variants TA 100 NR and YG1029. The use of a particle filter did not modify the genotoxicity of the diesel emissions, indicating a major contribution of the gas phase to the mutagenicity of these diesel emissions. The prominent role of the particulate-associated nitro-polycyclic aromatic hydrocarbons (nitro-PAHs) claimed by some authors working on diesel exhaust organic extracts was not confirmed by our results with native diesel exhaust exposure. Our results show that the gas phase is potentially more mutagenic than the particles alone.     

MESIP∗: Modelling environmental scenarios in ponds

MESIP is a fugacity model which can predict the fate of organic hydrophobic chemicals in aquatic ecosystems. In this paper a short introduction to the mathematical model is presented together with a more detailed listing of the required input data. Comparison of the calculated and measured fate of a fluorescent whitening compound in an artificial outdoor pond is shown     

Particulate and semivolatile associated aliphatic hydrocarbon exhaust emission from heavy duty diesel vehicles

The exhaust emissions from two heavy duty diesel vehicles running on eight different fuel compositions were investigated regarding their content of high molecular weight (≥ C₁₂) aliphatic/ olefinic hydrocarbons. It was concluded that the emitted amount of semi‐volatile associated aliphatic hydrocarbons (range C₁₂‐C₂₂) depend on the fuel used in the engines and that these emissions mainly consisted of uncombusted fuel components. It was also found that uncombusted engine lubrication oil was the main constituent of the emitted particulate associated aliphatic hydrocarbons (C₁₇‐C₄₀). These constituted between 58% and 95% of the total emissions of the high molecular weight aliphatic compounds. Emission factors for the total of high molecular aliphatic hydrocarbons (C₁₂‐C₄₀) were demonstrated to be in the range of 15–100 mg/km. Some individual aliphatic hydrocarbons with cocarcinogenic effects were identified and quantified in both particulate and semi‐volatile phases of the exhaust. Multivariate data analysis was used to investigate the relationship between fuel parameters and emission of semi‐volatile aliphatic emission.     

Experimental investigation into the oxidation reactivity, morphology and graphitization of soot particles from diesel/n-octanol mixtures

Aiming to investigate the impacts of n-octanol addition on the oxidation reactivity, morphology and graphitization of diesel exhaust particles, soot samples were collected from a four-cylinder turbocharged diesel engine fueled with D100（neat diesel fuel）, DO15（85% diesel and 15% n-octanol, V/V） and DO30（70% diesel and 30% n-octanol, V/V）. All tests were conducted at two engine speeds of 1370 and 2150 r/min under a fixed torque of 125 N ·m. The soot properties were characterized by thermogravimet...